9999 en stock
Introduction |
This super-speed USB 3.0 device is your friendly,secure and lightweight removeable
mass storage device disk enclosures.Computer will quickly configure the disk without
restarting when connected with the enclosure through USB cable.You can do everything
you like as using a disk driver.Since it can support large capacity,you can also play MP3
files,run program application and play videos directly from disk,and the enclosure is so
light and compact that you can carry it with you anywhere.It is so easy to install that you
can actually use it as your backup device or replace the ZIP drivers or MO drivers.Please
read the manual carefully before use this product.
|
Specification |
Transfer interface |
USB 3.0 |
Transfer rate |
5GMbps(Max) |
Support HDD |
2.5”/3.5” Hard Disk |
Work temperature |
-40~65°C |
Work humidity |
8%-90% |
Storage humidity |
5%-95% |
Operate system |
Win SE/ME/2000/XP/VISTA/WIN7 |
Hardware |
Your computer should have USB port |
Software |
Win SE/ME/2000/XP/VISTA/7 |
Note:Windows98 have to install CD driver
(Use the CD driver in accessories to install )
Specification |
1) Color:Silver, Black,Red |
2) USB 3.0 transfer rate:USB3.0 support to 5GMbps |
3) Suitable for SATA hard disk. |
4) Supports Win SE / ME / 2000 /XP/Vista/Win 7/8/10 or later versions |
5) Front power switch |
6) Equipped with LED indicates power and lock function |
7) Plug and play Hot swapping without rebooting |
8) Accessories: Package,Manual,Screw,Screwdriver,USB3.0cable |
Installation |
1. |
Open the box and take out the PCB and chassis |
2. |
Install the hard-disc onto the chassis |
3. |
Use the screws tighten the hard disk onto the chassis |
4. |
Put the chassis with hard-disc back into the box,tighten the screws. |
5. |
Connect AC power to external case |
6. |
Turn on the switch to “ON” |
7. |
Connect cable to USB port of computer |
F A Q |
1. My computer system is WIN98. Why can’t my computer identify my USB disk? |
A: Startup the computer, enter the BIOS setup, check whether the relevant options of USB in BIOS are
opened: set OnChip USB as Enabled; set USB Controller as Enabled; set PNP OS Installed as YES; set
Assign IRQ For USB as Enabled. To use USB device you need to drive USB interface first and enable mainboard chipset’s full support of
USB device to make preparations for the system to identify USB device. To use it in WIN98 system, a
correct driver needs to be installed; otherwise it cannot be identified by the system. The driver can be
obtained in the attached CD or related website.
|
2. Why is my USB disk clicking and cannot be identified? |
A: It is likely the USB interface is lack of power supply. The power of USB disk is large and requires rigid
voltage. The front USB interface is connected to the computer via cable and consume large amount of
voltage while transferring. Therefore, it is advised to connect the USB disk to the USB interface of the
rear mainboard. It is also possible that the front USB wire is connected in a wrong way. Provided that
there are two AM heads at the matched USB wire, both AM heads can be connected to the computer to
try if it works. It is suggested to use the matched USB wire provided by the factory since the USB wire
with poor quality or large length can affect regular service.
|
3. My computer cannot identify the USB disk, or it can identify the icon of the USB disk but
cannot open it or use it. Further more, whenever the USB disk is plugged in the system works
slower. Why is that?
|
A: It should be because of the USB lack of power supply. Please connect to AC adapter if the USB disk
has DC power adapter. If there is no DC adapter jack, it is suggested to connect to a USB HUB with
power supply (i.e. a USB HUB with DC power supply) in order to offer sufficient power supply.
|
1.Q: Are you a factory or trading company?
A: We are a factory which have our own professional R&D and production team.
2.Q:How can I get some samples?
A: We are honored to offer you samples.
3.Q:How does your factory do regarding quality control?
A: Quality is priority. We will always attach great importance to quality control from beginning to end for each procedure. Also our factory has passed CE,FCC,ROHS authentication.
4.Q: What payment terms will you accept?
A: T/T, West Union, Paypal
5.Q: How about the delivery lead time?
A: The lead time depends on order quantity.